Blink'r - 85-86 32V base MAF and idle setting tools

Easily check and set the MAF baseline using the undocumented 02 sensor diagnostic built into the 32V LH2² brain. Set the base idle speed, and CO for emissions testing.

Displays if WOT switch is working properly!

Both the MAF adjustment and base idle speed are important for a smooth idle and quick starts. Unlike '87-up, '85-'86 cannot self adjust! Base idle speed can change when a different grade of oil is used, for example. The WSM method for adjusting the CO requires a gas analyser! No WOT input reduces max torque, and can lead to dangerous pinging with AT/eBay chips!

Note: O2 blinking is unreliable w/big gap non-resistor plugs used w/S300s chipset.

For 85-86 USA/ROW 32V.

click for larger click for larger

Included:
(1) Plug-in diagnostic tool
(1) Flexible 3mm hex driver

PDF manual - Blink'r

Buy It! (made to order)